| Jentschmann Weldsonic7796 |
| Heavy stand-alone free arm Ultrasonic cutting and bonding machine for continuous gluing of fabrics, welding of thermoplastic coated tissues and cutting with manual setting of welding parameter adjustments. FParticularly suitable for cutting and edge sealing of very heavy materials like carpets conveyor belts etc. |
|
| Application: |
| |
Continuous cutting with edge sealing of heavy textiles. |
| |
Cutt-welding of thermoplastic or thermoplastic coated fabrics and fleeces. Thereby two layers one obove the other are cut and the edges are welded together at the same time. |
| |
Welding of thermoplastic or thermoplastic coated fabrics and fleeces. |
| |
Bonding of all kinds of fabric, fleeces and foils by means of heat avtivated adhesive tapes. | |
| Concept: |
Machine with free access to sonotrode and anvil roller for placing and positioning the fabric.
Lowering and lifting the anvil roller by pedal. Start/stop of welding, optional continuously by proportional pedal. Manual adjustment of welding power output.
Special anvil roller for cutting and edge sealing.
Manual material feed or integration of the machine into customized system with control interface
Setting of welding power output by amplitude, anvil roller pressure and bonding speed.
Manual adjustment of two welding power output settings.
Switching over to second power output setting by knee-lever switch |
| Features: |
| | Welding head consisting of solid welded steelsheets. |
| | Welding procedure: 35 kHz, 600 W ultrasonic with rotating 11 mm sonotrode and anvil roller, optional 7 mm steel or 20 mm 900 W sonotrode. |
| | Bonding speed: 0.3 - 10 m/sec. |
| | Sonotrode and anvil roller with 2 separate differentiable drives. |
| | Possibility of spotweld. |
| | Programmable weld repeat sequence backward and forward (backtack). |
| | Width of weld seam: 2 - 11/20 mm according to anvil roller. |
| | Under arm clearance: 1000 mm. |
| | Manual entry of two selectable welding parameter settings. |
| | Very low power consumption without power peaks. |
| | Environment-friendly! No microwaves, no nuisance. |
| | Power requirements: 1 x 230 V 10 A, compressed air 6 bars. |
|
| Options: |
| | Adhesive tape feeding systems |
| | Fabric guiding devices |
| | Pullers |
| | Cooling systems |
| | Special anvil systems |
|
